HONJO FENDERS

models and prices
Jitensha Studio imports and is a big fan of Honjo fenders. They are beautiful, sturdy, yet lightweight. They are expensive but worth every penny. We feel they are the only fender appropriate for a top quality bicycle.

Honjo fenders need to fit the wheel and tire size closely to look right. As a result they come in a range of circumferances and widths. They also come in two finishes: smooth (with fluting in some models) and hammered.

Hammered finish fenders are available in two widths for 700c tires.

We now have a narrow fender that looks great on slimmer tire sizes. We also have a 4 mm fender stay and 4 mm hardware (the stay and mounting posts are normally 5 mm) for lighter weight applications such as this.
Also new: alternative sets of mounting hardware that allow solutions for many more bikes.
Unlike less expensive fenders which attach to the frame with a tab that is either folded up out of the fender material or riveted on, Honjo fenders are through-bolted directly to the frame. They will not break or rattle. Where necessary, however, we have several adapters so that they can be mounted on frames that don't have integral mounts.
The bolt-through attachment is not only more secure, but also allows more tire clearance.
To use the stock hardware, you will need 10 mm of clearance between the right rear stay eyelet and the small freewheel cog.

If this is an issue see the new mounting solutions listed above.
All materials are beautifully finished. They are the perfect complement to a handmade frame.
A close-up of the machined attachment hardware.
Here are some photos showing how Honjo fenders are made.

AVAILABLE MODELS, SMALL PARTS, AND PRICES:
(Note: All sales of fenders and parts are final. Please call and make sure you are ordering the correct parts.)
FENDERS

(N means smooth surface,
CN means hammered surface.)

700C models:

fender model:
NH 29-700N
width: 43mm
depth: 20mm
finish: smooth
fit. 700 x 28c-35c
price: $58/pr.
HI 27-700CN
width: 43mm
depth 20mm
finish: hammered
fit. 700 x 28c-35c
price: $63/pr.
NH 27-700CN
width: 35mm
depth:18mm
finish: hammered
price: $60/pr.
NH 35-700N
width: 35mm
depth:16mm
finish: smooth, round, no fluting or ridge
price: $55/pr.
new fender model:
NH401-700N
width: 40 mm
depth: 20 mm
finish: smooth, round, no fluting or ridge
price: $55/pr.

650 A,B models:

fender model:
H451-650N
width: 45mm
depth:20mm
finish: smooth
price: $58/pr.
H451-650CN
width: 45mm
depth:20mm
finish: hammered
price: $63/pr.
H501-650N
width: 50mm
depth: 25mm
finish: smooth
price: $60/pr.
H501-650CN
width: 50mm
depth: 25mm
finish: hammered
price: $65/pr.
New model for 650B wheels:

NH 581-650N
width: 58mm
depth: 28mm
finish: smooth
price: $70/pr.
New model originating with Toei--a smooth fender ideal for 650 X 32B tires, available in the U.S. only through Jitensha Studio:

H431-650N
width: 43mm
depth: 20mm
finish: smooth
price: $60/pr.
Models for 26 inch wheels

New model (26 inch wheel size for MTB wheels with 1.25 - 1.5 inch tires):

fender model:
H451-26N
width: 45mm
depth:20mm
finish: smooth
price: $60/pr.
H451-26CN
width: 45mm
depth:20mm
finish: hammered
price: $65/pr.
ATTACHMENT HARDWARE

Special--get a 20% discount on hardware when purhased with a pair of fenders.

U-STAYS:

5mm u-stay
price: $12/pr.

4mm u-stay
price: $11/pr.
DARUMA screw (brass construction)

price 4pcs. set: $12
$3.25 each piece if sold separately
Now available again--Daruma screw in aluminum

price 4 pcs. set: $14.00
$4.00 each piece if sold separately
DARUMA screw (new stainless models)
two models:

1. standard length - same function as the brass screw listed above.

2. a longer threaded portion and stronger construction for use where a fender stay and a rack mount must be accommodated.

$5.00 each piece
R-clip (5mm or 4mm)

price 4pcs. set: $8.00
$2.25 each piece if sold separately
crown DARUMA

price: $5.50
sliding bridge bracket (allows mounting of fender to brake bolt)
price: $4.00

New hanger bracket hardware allows mounting fenders to brake bolts on frames lacking fender mounting braze-ons:

Front bracket. Includes bracket, screws and fender reinforcing plate.

price: $4.50

Rear bracket. Includes bracket, screws and fender reinforcing plate.

price: $4.50

COMPLETE SETS:

each kit includes:
1 pair of fenders ( front & rear)
2 u-stays, one per fender
1 crown DARUMA
1 sliding bracket
4 DARUMA screws
4 R-clips

Fender models available as kits with prices:
NH35-700N: $85
NH27-700CN: $90
NH29-700N: $85
H1-27-700CN: $90